High Glass Temperature Tolerance With Tempered Glass

Many industries require glass products that can tolerate high glass temperature without breaking. Industries that have this as a high demand are such as the cooking sector and the scientific sectors. In terms of cooking products, demand for glass pots and glass baking bowls are on the rise. This is particularly because these products are safer and easier to clean. In the scientific sector on the other hand, requires products that can tolerate high glass temperatures such as in test tube, pipettes and other scientific apparatus.

Ordinary glass would fail to meet the high temperature tolerance needed to perform the functions. The solution for this is to use products made out of tempered glass. These products are able to tolerate higher temperatures when compared to the other non tempered kind. This is commonly known in industry as hot toughness.

Obviously the tempering process has a role in introducing the hot toughness characteristic in tempered kinds. In the tempering process, the temperature is heated up until it reaches its softening point. After reaching this point, the material is cooled rapidly by blowing a jet of cold air or water mist over it.

As a result finer microstructures are produced resulting in higher material strength. In addition to this, the tempered glass product can withstand high glass temperature.

Besides being able to tolerate high glass temperatures, the tempering process also brings about other benefits such as reducing the hazard level. Many glass related injuries can be contributed to the fact that the glass breaks into many sharp pieces when it breaks. However, after exposing the glass to high glass temperature during the tempering process, the tempered glass breaks in many small pieces which prevents serious injuries from occurring.

Exposing the glass to higher glass temperature during the manufacturing process also increases the edge strength of the finished product. This basically means that the glass product will have lower chipping tendencies as compared to the normal glass.

In essence, the process of tempering glass can be very beneficial to increase its physical and operational qualities. Although it might cost a little bit more expensive compared to the normal glass product, tempered glass products are totally worth it. You should look at it as a long term investment as the probability that you would have to replace them quickly is very low. Once you buy a tempered glass product, it would be a while before you would even need to think about replacing it.

The tempered glass products are tougher, safer, are less prone to chipping and above all, they can tolerate higher glass temperatures. This makes tempered glass products an obvious choice for you to make if you operate within the sectors mentioned earlier.


Related Posts

Leave a Reply

Your email address will not be published.